Blog Layout

4 Ways to Maintain Wrought Iron

Jun 28, 2022

Wrought iron is an attractive material for residential properties. It has a rough finish with decorative features that highlight its intricate curves. However, when it comes to preserving appearances, it requires several steps. Take a closer look at the following to ensure the proper level of care. 

How to Care for Wrought Iron

1. Clear Away Brush

It can be difficult to trim the weeds that grow underneath your wrought iron fence. The issue is that these clumps tend to retain moisture, which can increase the risk of rust. This will cause a gradual decay that could jeopardize the integrity of the metal. Use a pair of hand shears to clear away the taller growth and give the fence a chance to dry out.

2. Keep It Clean

Dirt and debris that collect along the surface of wrought iron furniture will soon become nearly impossible to remove. Any moisture will cause it to turn into clay and stick like glue to the inner sections of the design. Wiping it down at least once or twice a month with a solution of warm water and mild detergent should keep it looking pristine.

3. Repair Damage

If rust has a chance to take hold, then you'll need stronger treatment. Use a fine-wire brush and sandpaper to gently scrub the affected area. Once you remove the flakes, scrub the metal clean and leave it to dry. Apply a coat of wax, protective spray, or paint to prevent additional moisture from causing issues.

4. Cover With Tarp

Families who go away for an extended period should cover their wrought iron furniture with a tarp. Secure it with a couple of bungee cords or rope to ensure it doesn’t blow away. This will serve as a barrier against the elements and keep dust from collecting on the material.

Steel Table And Chair — Mellman & Perdue CPAs — Oakland, CA

If you’re looking to include wrought iron in your home or landscape design, reach out to Creative Iron Arts in Hayward, CA. This full-service metal fabrication company specializes in creating custom pieces. Their staff is skilled at both design and installation and provides a personal approach to each project. Call (510) 910-2175 to request a free estimate or visit their websites for examples of their metal fencing and gates.

How Installing Metal Fencing Impacts Home Value

29 Jun, 2022
Quality metal fencing around your property offers privacy, security, and a 70% return on investment . This profitable upgrade will offer several benefits if you decide to sell in the future. Here's a closer look at how the installation positively impacts home value and attracts house hunters.

3 Types of Residential Fences

29 Jun, 2022
There are several fence styles and materials available, and each has its own unique look, from basic chain-link to beautiful wrought iron . While some options can be installed to boost security, others can complement your home’s architecture and enhance its curb appeal. Here are a few suggestions to consider if you want to install a residential boundary.

A Guide to Solid & Hollow Iron Balusters

29 Jun, 2022
If you are renovating your house and wish to install custom metal railings, you’ll have to decide between hollow wrought iron and solid iron balusters. Also known as spindles, balusters provide handrail support and safety in addition to decorative elements. Learn about solid and hollow balusters here to determine what’s best for your home.

3 Tips for Maintaining Custom Metal Balusters & Railing

29 Jun, 2022
If you're planning to have metal balusters or railing professionally installed in or around your home, they will add another layer of ornate beauty to the property, especially if maintained properly. Here are several tips for keeping these custom metal decorative pieces looking their best.

3 Signs You Need to Replace Your Metal Gate

29 Jun, 2022
Metal gates not only provide entry and exit points on a property but also enhance security and privacy and boost curb appeal. A well-constructed gate will maintain its strength and functionality for many years, but the time will come when even the best gate wears down. Here are three common signs that the time has come to replace your gate.

3 Benefits of Installing Metal Stairs at Home

28 Jun, 2022
Many people slowly evolve their homes over time to include more modern elements. For some, this means eventually replacing a worn-down or unfashionable staircase. While these fixtures can be made out of many materials—including wood, stone, or tile—many property owners are discovering the advantages of custom metal staircases . The guide below explores why you might want to make this investment.

3 Benefits of Wrought Iron in Outdoor Design

28 Jun, 2022
Wrought iron is a strong and beautiful material frequently used for fencing, railings, and awnings. It can even be fashioned into attractive outdoor furniture. With appropriate upkeep, wrought iron fixtures will become valuable long-term investments for your home. Here are just a few of the benefits you can expect.

How to Choose a Quality Metal Fabricator

28 Jun, 2022
If you're in need of metal fabrication at your home or business, choosing the right company will go a long way toward ensuring great results. High-quality custom metal fixtures should not only be aesthetically appealing but also able to stand the test of time, and the company should be one you can trust. Here are several factors to consider when deciding who will help enhance your property.

A Guide to Metal Awnings

28 Jun, 2022
A building's awnings or overhangs are coverings affixed to its exterior walls to provide shade from the sun. While they are available in a variety of designs that might enhance the aesthetic appeal of your home, they are typically constructed of fabric or metal. If you're considering installing an awning on your home, here's what you can expect from the ones made of metal.
Share by: